Super PDR 68Pcs Auto Body Paintless Dent Removal Tools Kit LED Reflect Light Board Dent Lifter Bridge Puller Set For Car Hail Damage And Door Dings Repair

1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth. Product list:

1pcs LED line board 1pcs 2in1 T Bar 1pcs golden dent lifter 1pcs 100W glue gun 5pcs metal tap down 5pcs nylon tap down 6pcs pro glue sticks 36pcs pro tabs 1pcs rubber hammer 1pcs dent hammer 1pcs cleaning cloth 1pcs holder puller 1pcs Alcohol Bottle(empty) 1pcs introduction guide NOTES: 1.The best melt time for glue stick in 100w Glue Gun is 5-8 Minutes. 2.The strongest viscosity comes after 2 Minutes when the tabs put on the car. 3.the yellow glue has the strongest viscosity.Suit for Harder Parts. 4.Please be patient while operating. 5.If you have any questions,please feel free to contact us directly,we'll try our best to help you.
Brand: Super PDR, Size: 68pcs without bag