Andrews EV27 Cam for Harley Davidson EVO Big Twin 84-99

Measurement of cam and pinion gears is especially critical for 90 and later models to verify proper fit.

Bolt-in street cam with fast open and close ramps

Similar in timing to EV3 but designed to produce a very broad torque band

Excellent cam for full dress touring bikes

Pulls 1500 to 6000 RPM

Andrews Products Grinds Its Cams With the Help of a Computer With Cam Design Capabilities. This Superior Technology Gives the Utmost in Both Performance and Reliability. Only the Best Alloy Steel Billets and Heat-Treating Processes Are Utilized. Furthermore, the Power in Harleys Evolution Engines Can Be Made Even More Convincing When a Superior Andrews Computer-Designed High-Performance Cam Is Installed. These Hydraulic Lifter Cams Are Capable of 6,000-Plus Rpm With Stock Springs and No Valve Float. EV27 EVOLUTION CAM

Bolt-in Street Cam With Fast Open and Close Ramps

Similar Timing to EV3, but Designed to Produce a Very Broad Torque Band

Pulls From 1,500 to 6,000 Rpm

Uses Stock Springs; Works With Carbs or Fuel Injection

Fits All 1984-1999 Harley Davidson Evolution Big Twin Models (Excludes 1999 Twin Cams)

Made in the USA

Sold Individually

INTAKE

Open (In Degrees): 20

Close (In Degrees): 36

Duration at .053 (In Degrees): 236

Duration at .020 (In Degrees): 270

Valve Lift: .495

Lift at TDC: .182

EXHAUST

Open (In Degrees): 46

Close (In Degrees): 14

Duration at .053 (In Degrees): 240

Duration at .020 (In Degrees): 274

Valve Lift: .495

Lift at TDC: .166

NOTE: It Is the Installer's Responsibility to Check Coil Bind and All Clearances

NOTE: The Image Displayed Is Representative of Andrews Cams, but May Vary Depending on Your Specific Model.

Brand: Andrews, Model: LEPAZA73716, Size: S