Master Magnetics Flexible Magnet Sheet with White Vinyl, Sign Blank - 1/32" thick x 24" wide x 48" long (1 sheet rolled inside tube)

1/32" thick x 24" wide x 48" long flexible magnetic sheet is magnetic on one side only with a white vinyl on the reverse and is used as a sign blank for creating vehicle signs or large magnetic signs.

The non-magnetic side is laminated with a white vinyl with satin finish, and is printable with screen print Inks, lettering enamels, self-adhesive backed vinyl letters and numbers and wet-erase type markers.

This product is NOT designed for magnets to stick to RATHER it holds itself directly to a flat, smooth steel surfaces like fridge and auto.

If magnet is applied to smooth, flat, ferrous steel without holes and without material or paper between pounds of pull are up to 85 per square foot, less for smaller pieces.

Can be cut with heavy scissors, knife, or die.

For best results: 1)Allow magnet to reach room temperature. 2)Unroll magnet. 3)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. If applying to a painted vehicle, the vehicle's surface should be waxed a minimum of 48 hours in advance before applying magnetic sheeting. For new vehicles or newly painted vehicles, wait approximately 90 days for the paint to cure before applying magnetic sheeting. Caution: Avoid repainted surfaces, non-metallic body fillers and wood grain vinyl siding. Wipe the surface of the vehicle with a clean dry cloth before application and make sure that all grime, dust, and dirt has been removed. It is best to apply flexible magnetic sheeting when the temperature of magnet is around room temperature or about 60 degrees Fahrenheit. Carefully align one edge of the flexible magnetic sheet to the vehicle's surface. Allow the remainder of the sheet to apply itself to the vehicle's surface. Do not allow air pockets to form under the sheet. If not aligned correctly, be sure to completely remove the sheeting and start over again. Do not pull or drag the sheet to realign it. This can damage or stretch the material. TAKE CARE AND CLEAN magnetic sign by removing flexible magnet sheeting periodically to guard against moisture and dirt buildup. Trapped dirt between magnet and vehicle can damage its finish. Clean flexible magnetic sheeting as well as the surface to be re-applied weekly with a mild detergent, wipe with a soft cloth and allow to dry. This helps to lengthen the life of your flexible product and protects the surface of your vehicle. Withstands continuous exposure to temperatures ranging from 0 degrees Fahrenheit to 150 degrees Fahrenheit.
Brand: Small Parts, Model: 07060