1080P Transmission-- This HDMI extender supports 1080P HD, HD Audio, 3D; It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6 or higher level cables following standard IEEE-568B, For better performance, we suggest to use cable longer than 45ft/15mHDMI Lossless transmission-- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the specification automatically for different cable lengths 1-60m to achieve the best displayPure Hardware Transmission-- It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video image more vividIR Remote Control-- Support 2060KHz wide Frequency IR signal transmission for controlling the source device, IR Emitter Cable and IR Receiver Cable are includedInstallation Requirements-- HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc); HDMI display device like SDTV, HDTV, projector with HDMI port; UTP/STP cat6/6A/7 cable; We stand by our products 100% with a 12-month warrantyDescription: The HDMI extender over a single UTP cables with IR control is the right way to send your HDMI signal over long distances. Instead of using expensive HDMI cables, this device lets you use your existing Cat6/7cables/sockets while also performing the same functions like transferring Deep Color video and new lossless compressed audio. And if that weren't enough, you can use your existing remote to control your device through an IR blaster.
Specification: HDMI signal: Comply HDCP Resolution supported: 480i60Hz, 480p60Hz, 576i50Hz, 576p50Hz, 720p50/60Hz, 1080i50/60Hz, 1080p50/60Hz Network cable: Low resistance and consumption oxygen-free copper coreCAT6CAT6ACAT7 Transmission length: CAT6:60m at 1080P IR remote control: Support 2060KHz wide frequency IR remote control Working temperature: 060 power: DC5V/1A power consumption: TX2W RX<2w>2w> Product size: 2.82(W) x 2.62(D) x0.98(H)inch
Package Contents: 1 x HDMI to RJ45 sender TX 1 x RJ45 to HDMI receiver RX 2 x DC5V/1A power 1 x User manual 1 x IR blaster extension cable 1 x IR receiver extension cable
Note: 1.High quality cat6 or cat6a cable is needed to work with this hdmi extender,preferably longer than 15 meters/45ft or above 2.Only supports the PCM audio output 3.Do not mix up HDMI to RJ45 sender and RJ45 to HDMI receiver before installation. 4.Do not hot plug when it is working. 5.Make sure the cables in right connection. 6.Please press RX RESET button when no image output. 7.Please make sure the cables follows 568B and reset TX/RX to input HDMI Signal when RX"LINK" Led is flashing all the time.
Brand: MYPIN, Model: 713382813037, Color: LKV372A 60M, Size: 7.76.65.9inch
